What is a “Walking Washing Machine” and How Do I Fix It?

o you have a walking washing machine on your hands? Learn about this issue from our professional washing machine repairmen in Colorado Springs, CO.

What is a “Walking Washing Machine” and How Do I Fix It?

Do you have a walking washer on your hands? 

Washing machines aren’t really able to walk. For many families, however, a “walking” washer is a chronic problem. Walking washers are a minor safety hazard, but they’re also notorious for extending wash cycles and increasing water usage. 

Below, you’ll find the definition and causes for a walking washing machine. While there is some basic troubleshooting you can do at home, it is best advised to contact a Colorado Springs appliance repairman to come take a look at any problem appliance.

What is a “Walking” Washer? 

A walking washer is a term for washing machines that have begun to shake during cycles. 

The phenomenon is hallmarked by fierce rattling during loads, which is often accompanied by loud “bangs” as wet clothes slam against the inside of the machine.  

The primary issues associated with shaking machines include:

  • Minor safety hazards
  • Extended wash cycles 
  • Increased energy usage
  • Premature machine wear

Causes for Walking Washers

It can be hard to determine the cause of a rattling washing machine without the help of an experienced professional. Although washing machine repairs seem simple, a DIY repair could cause further damage to your machine or lead to physical danger like electrocution. 

If you’re local to the Front Range, we recommend working with a professional washing machine repairman in Colorado Springs (like Pikes Peak Mechanical) to pinpoint the issue.

If you choose to troubleshoot the problem yourself, start with the most common causes: 

Heavy, Imbalanced Loads: 

The number 1 cause of shaking washers is imbalanced loads. If only one side of a washing machine is filled with clothes, the uneven weight distribution can cause the machine to wobble violently. 

Unlevel Internal Settings: 

During a move or DIY repair, the wash drum can slip out of position. Test the internal settings by placing a basic level on top of the washer. If the tool shows that the top section of the machine is out of balance, it’s safe to also assume that the internal drum has also moved from its original position. 

Unlevel Ground or Feet: 

When it is placed on uneven ground, a washing machine’s “feet” shift into awkward positions. Using a level, determine which side of the washer has shifted higher or lower than the other. To do this, tilt the machine back to expose the front “let” and locking nut. Adjust the leg slightly, then place the washer down and reanalyze the level. Note: this test requires the help of an extra person and should not be tried alone. 

As one of the most heavily used appliances in your home, a washing machine is a key part of a household’s daily life. Waiting to fix a walking washer can make laundry more time-consuming and increase your monthly water usage. If the problem isn’t corrected, it can lead to future damage to your machine over the years. 

Remember: While this issue can be repaired by an experienced handyman, it’s best to request the help of a professional appliance repair service. If you’re located in Southern Colorado, contact our washing machine repairman in Colorado Springs to get your appliance fixed safely and quickly. 

Read 1225 times

call now

angies super service award

Our Services

Refrigerator Repair

Refrigerator Repair

Washer Repair

Washer Repair

Dryer Repair

Dryer Repair

Stove, Oven, Cooktop Repair

Stove, Oven, Cooktop Repair

Dishwasher Repair

Dishwasher Repair

Disposal Repair

Disposal Repair

Serving the Colorado Springs & Pueblo, CO Areas

Colorado Springs:  Call (719) 522-1577 

Pueblo, CO:  Call (719) 565-8373